View的测量

控件的测量可以说是固定写法,原生的View只支持EXACTLY的测量模式,我们自定义的控件可以重写onMeasure方法

@Override
protected void onMeasure(int widthMeasureSpec, int heightMeasureSpec) {
    setMeasuredDimension(getMeasuredSize(widthMeasureSpec), getMeasuredSize(heightMeasureSpec));
}

onMeasure方法给我们返回的widthMeasureSpecheightMeasureSpec,我们并不能直接拿过来使用,需要使用MeasureSpec类进行解析,来获取测量后的具体值。

首先需要获取测量模式

MeasureSpec.getMode(measureSpec)
``` 
getMode方法返回是测量的模式,有以下3种类型:
- MeasureSpec.EXACTLY : 精确值模式(指定值/match_parent)
- MeasureSpec.AT_MOST : 最大值模式(wrap_content)
- MeasureSpec.UNSPECIFIED : 不指定大小的测量模式(一般用不上)
获取到了测量模式以后,获取测量后的大小
``` java
MeasureSpec.getSize(measureSpec)

根据上面的意思,可以封装我们的getMeasuredSize方法

// 默认大小
private static final int DEFAULT_SIZE = 200;
/**
 * 获取测量后的大小
 *
 * @param measureSpec measureSpec
 * @return measuredSize
 */
private int getMeasuredSize(int measureSpec) {
    switch (MeasureSpec.getMode(measureSpec)) {
        case MeasureSpec.EXACTLY: // 精确值模式(指定值/match_parent)
            Log.i(TAG, "getMeasuredSize: 精确值模式");
            return MeasureSpec.getSize(measureSpec);
        case MeasureSpec.AT_MOST: // 最大值模式(wrap_content)
            Log.i(TAG, "getMeasuredSize: 最大值模式");
            return Math.min(DEFAULT_SIZE, MeasureSpec.getSize(measureSpec));
        case MeasureSpec.UNSPECIFIED: // 不指定大小的测量模式
            return DEFAULT_SIZE;
        default:
            return DEFAULT_SIZE;
    }
}

现在我们自定义的View就支持自定义的大小了,包括match_parentwrap_content具体值

View的绘制

画笔属性

创建画笔

Paint paint = new Paint();
方法 描述 举例
public void setAntiAlias(boolean aa) 设置画笔锯齿效果 true 无锯齿效果
public void setColor(@ColorInt int color) 设置画笔颜色
public void setARGB(int a, int r, int g, int b) 设置画笔的A、R、G、B值
public void setAlpha(int a) 设置画笔的Alpha值
public void setTextSize(float textSize) 设置字体的尺寸
public void setStyle(Style style) 设置画笔的风格(空心或实心) paint.setStyle(Paint.Style.STROKE);// 空心 paint.setStyle(Paint.Style.FILL); // 实心
public void setStrokeWidth(float width) 设置空心边框的宽度

Shader

BitmapShader, ComposeShader, LinearGradient, RadialGradient, SweepGradient

/**
 * Helper for drawPoints() for drawing a single point.
 */
public void drawPoint(float x, float y, @NonNull Paint paint)

canvas.drawPoint(10, 10, paint);

直线

绘制一条直线

/**
 * Draw a line segment with the specified start and stop x,y coordinates,
 * using the specified paint.
 *
 * <p>Note that since a line is always "framed", the Style is ignored in the paint.</p>
 *
 * <p>Degenerate lines (length is 0) will not be drawn.</p>
 *
 * @param startX The x-coordinate of the start point of the line
 * @param startY The y-coordinate of the start point of the line
 * @param paint  The paint used to draw the line
 */
public void drawLine(float startX, float startY, float stopX, float stopY, @NonNull Paint paint)

绘制多条直线

public void drawLines(@Size(multiple=4) @NonNull float[] pts, @NonNull Paint paint)

矩形

/**
 * Draw the specified Rect using the specified paint. The rectangle will
 * be filled or framed based on the Style in the paint.
 *
 * @param left   The left side of the rectangle to be drawn
 * @param top    The top side of the rectangle to be drawn
 * @param right  The right side of the rectangle to be drawn
 * @param bottom The bottom side of the rectangle to be drawn
 * @param paint  The paint used to draw the rect
 */
public void drawRect(float left, float top, float right, float bottom, @NonNull Paint paint)

canvas.drawRect(100, 100, 200, 200, paint);

这里写图片描述

圆角矩形

/**
 * Draw the specified round-rect using the specified paint. The roundrect
 * will be filled or framed based on the Style in the paint.
 *
 * @param rx    The x-radius of the oval used to round the corners
 * @param ry    The y-radius of the oval used to round the corners
 * @param paint The paint used to draw the roundRect
 */
public void drawRoundRect(float left, float top, float right, float bottom, float rx, float ry, @NonNull Paint paint)

canvas.drawRoundRect(100, 100, 200, 200, 20, 20, paint);

这里写图片描述

/**
 * Draw the specified circle using the specified paint. If radius is <= 0,
 * then nothing will be drawn. The circle will be filled or framed based
 * on the Style in the paint.
 *
 * @param cx     The x-coordinate of the center of the cirle to be drawn
 * @param cy     The y-coordinate of the center of the cirle to be drawn
 * @param radius The radius of the cirle to be drawn
 * @param paint  The paint used to draw the circle
 */
public void drawCircle(float cx, float cy, float radius, @NonNull Paint paint)

// 画圆
canvas.drawCircle(200, 200, 100, paint);

这里写图片描述

扇形

/**
 * <p>Draw the specified arc, which will be scaled to fit inside the
 * specified oval.</p>
 *
 * <p>If the start angle is negative or >= 360, the start angle is treated
 * as start angle modulo 360.</p>
 *
 * <p>If the sweep angle is >= 360, then the oval is drawn
 * completely. Note that this differs slightly from SkPath::arcTo, which
 * treats the sweep angle modulo 360. If the sweep angle is negative,
 * the sweep angle is treated as sweep angle modulo 360</p>
 *
 * <p>The arc is drawn clockwise. An angle of 0 degrees correspond to the
 * geometric angle of 0 degrees (3 o'clock on a watch.)</p>
 *
 * @param startAngle Starting angle (in degrees) where the arc begins
 * @param sweepAngle Sweep angle (in degrees) measured clockwise
 * @param useCenter If true, include the center of the oval in the arc, and
                    close it if it is being stroked. This will draw a wedge
 * @param paint      The paint used to draw the arc
 */
public void drawArc(float left, float top, float right, float bottom, float startAngle, float sweepAngle, boolean useCenter, @NonNull Paint paint)

// 扇形 起始角度0度 旋转角度120度
canvas.drawArc(100, 100, 200, 200, 0, 120, true, paint);

这里写图片描述

弧形

扇形通过调整属性,可以实现弧形的效果,首先画笔设置成空心

// 空心
paint.setStyle(Paint.Style.STROKE);

设置画扇形的useCenter参数为false

// 弧形 起始角度0度 旋转角度120度
canvas.drawArc(100, 100, 200, 200, 0, 120, false, paint);

这里写图片描述

椭圆

/**
 * Draw the specified oval using the specified paint. The oval will be
 * filled or framed based on the Style in the paint.
 */
public void drawOval(float left, float top, float right, float bottom, @NonNull Paint paint)

// 椭圆
canvas.drawOval(100, 100, 500, 300, paint);

这里写图片描述

文字

/**
 * Draw the text, with origin at (x,y), using the specified paint. The
 * origin is interpreted based on the Align setting in the paint.
 *
 * @param text  The text to be drawn
 * @param x     The x-coordinate of the origin of the text being drawn
 * @param y     The y-coordinate of the baseline of the text being drawn
 * @param paint The paint used for the text (e.g. color, size, style)
 */
public void drawText(@NonNull String text, float x, float y, @NonNull Paint paint)

// 文字
paint.setTextSize(30);
paint.setColor(Color.BLACK);
canvas.drawText("KongQingwei", 100, 100, paint);

这里写图片描述

在指定位置显示每个字符

/**
 * Draw the text in the array, with each character's origin specified by
 * the pos array.
 *
 * @param text  The text to be drawn
 * @param pos   Array of [x,y] positions, used to position each character
 * @param paint The paint used for the text (e.g. color, size, style)
 *
 * @deprecated This method does not support glyph composition and decomposition and
 * should therefore not be used to render complex scripts. It also doesn't
 * handle supplementary characters (eg emoji).
 */
@Deprecated
public void drawPosText(@NonNull String text, @NonNull @Size(multiple=2) float[] pos, @NonNull Paint paint)

canvas.drawPosText("KongQingwei", new float[]{
        30,30,
        60,60,
        90,90,
        120,120,
        150,150,
        180,180,
        210,210,
        240,240,
        270,270,
        300,300,
        330,330
}, paint);

这里写图片描述

绘制路径

可以自定义画出想要的任意图形

五角星

/**
 * Draw the specified path using the specified paint. The path will be
 * filled or framed based on the Style in the paint.
 *
 * @param path  The path to be drawn
 * @param paint The paint used to draw the path
 */
public void drawPath(@NonNull Path path, @NonNull Paint paint)

Path path = new Path();
path.moveTo(0,100);
path.lineTo(250,300);
path.lineTo(150,0);
path.lineTo(50,300);
path.lineTo(300,100);
path.lineTo(0,100);
canvas.drawPath(path,paint);

这里写图片描述

空心

paint.setStyle(Paint.Style.STROKE);

这里写图片描述

图形裁剪

以上面的实心五角星为例,以五角星的中心为圆心,裁剪出一个半径为100的圆形

/**
    * Modify the current clip with the specified path.
 *
 * @param path The path to operate on the current clip
 * @param op   How the clip is modified
 * @return     true if the resulting is non-empty
 */
public boolean clipPath(@NonNull Path path, @NonNull Region.Op op)

// 裁剪一个圆形
Path path = new Path();
path.reset();
path.addCircle(150, 150, 100, Path.Direction.CCW);
canvas.clipPath(path, Region.Op.INTERSECT);
// canvas.save();
// 画五角星
path.reset();
path.moveTo(0,100);
path.lineTo(250,300);
path.lineTo(150,0);
path.lineTo(50,300);
path.lineTo(300,100);
path.lineTo(0,100);
canvas.drawPath(path,paint);

这里写图片描述

Region.Op 描述 样式
INTERSECT 裁剪内部交集 这里写图片描述
DIFFERENCE 外部 这里写图片描述
你可能感兴趣的内容
Android开发最佳实践 收藏,3066 浏览
0条评论
PH

Philip-Morton

这家伙太懒了,什么都没留下
Owner